Page 1 of 1

Hilux 3" suspension lift, what else is needed???

Posted: Thu May 11, 2006 6:20 pm
by brad 93hilux
Hi i am putting a 2" suspension lift with 2" extended shackles an climax shackles on the rear, i know that i have to extend the brake lines but arb said i also needed an ajustable torque arm and a whole heap other stuff.

Does any one know for sure what i need coz they arn't really sure and i don't wanna buy things i don't need (its only 3" lift)

P.s. i have a 1993 hilux with 33/12.5, duel cab.

cheers brad :armsup:

Posted: Thu May 11, 2006 7:19 pm
by GoTheLux
Adjustable torque rod , dropped drag link & raise your brake bias bracket where the arm attaches to the rear diff should be about it

Posted: Fri May 12, 2006 4:17 pm
by brad 93hilux
:armsup: Cheers :armsup:

Posted: Fri May 12, 2006 4:36 pm
by brad 93hilux
What about caster wedges, i read on superior engineering site that you need 3 degree caster wedges because when you go 2" extended shackles you alter the caster angle which affects steering geometry.

Does any one know about this? Where do the caster wedges go? (i think under the spring but not sure.

Thanks brad[/code]