Outer Limits 4x4 Board

Hi there, Picked up my new beast today a 1976 Rangie ... (yes that was '76 by the way not '86 or even '96) but it has a P76 4.4 in it on LPG.

All Good. Except the holley carby and the lpg setup sticks the air cleaner through the bonnet where they have placed a 'nice' letterbox setup. I can fix all that with a body lift but I still want to run a snorkel off it preferably with a sort of 3 inch adaptor elbow off the top of the carby and a std rangie canister style filter- it must have been done before. I'd just like to know how and see pics if possible.

Ta guys!

I spent ALOT of time and ALOT of swearing making this sucker up and used a std Commo Airbox ontop of the inner gaurd. but she no leak!!!

I've justput in a 2.5" body lift and I'm pretty sure there is plenty of clearance for a airbox around the whole thing now

After a quick spurt around the block I'm startin to think the 350 is too small as well but thats a different story.

Simon

hmmm pics not working, pm your email.

its basically a ring that sits underneath the diaphragm in the mixer the easiest way to describe it would be to say its a mini airbox without a filter and forces the air into the carb... the pictures say 1000 words however.

Simon

Although not into a rover motor on gas, I run dual snorkels, each into modified 3.5 airboxes, then into the motor.
heres some pics, ignore the mess, nowhere near finnished but you get the picture
Damien

whats going on with the pictures around here?

dunno- try pming them if needs be...

email is easier for me