Page 1 of 1

rear drive shaft

Posted: Sun May 14, 2006 8:15 am
by Locknut
G'day fellas
i have put a slight dint and sort of shallow scrape marks on my drive shaft near the rear uni joint,would this cause any vibration while driving??
as im now getting a slight vibration and im looking for the........................ "what bloody now"

NH lwb Autocrap

Posted: Sun May 14, 2006 11:11 am
by 88pajero
G'day, scrapes wont do a thing but a dent might be able to slightly put it out of balance. Have you checked the rear uni to see if its got any movement, thatll definately do it..

Posted: Sun May 14, 2006 12:49 pm
by hudson44
There are small weights tacked onto the drive shaft which are used to balance the shaft. Is it possible that you have knocked one of these off? If the vibration has occurred since you hit the drive shaft, then you would have to assume that it is related! I would remove the shaft and have it balanced!

Hope this helps

Gabe

Posted: Sun May 14, 2006 6:15 pm
by Glennb
Id say for sure your tail shaft is out of balance due to the hit . If your lucky a balance will fix it , about $80.

Posted: Mon May 15, 2006 3:51 pm
by Locknut
do you know if a manuel drive shaft will fit a auto?? as a mate has a manuel and i can just swap them over to see if that is the problem.
Gav

Posted: Mon May 15, 2006 8:09 pm
by Bitsamissin
No it won't the auto drive shaft is shorter.

Posted: Tue May 16, 2006 4:40 pm
by Locknut
BUGGA