Outer Limits 4x4 Board

Hey Fellas
I need a bit of help from any brissie boys who know where i can get a good 7MGE with loom, bellhousing (supra), and computer.
Every jap import place i call say they can get the motor but no loom or computer. I plan on putting this motor into my hilux so i need the whole running engine and probibly the Efi pump ect.
So if anyone knows of anyone around brisbane who can help me please drop me a reply.

CHEERS

SASS

The 7M-GE is rare in a supra, most were 7M-GTE ( turbo ), and then alot were auto as well.

The best way to go is chase down a Supra 5M-GE so can steal the clutch, flywheel, bellhousing, pumps etc... Then get a 7M-GE from a crown or cressida. All the sedans were auto.

The loom is usually cut when the motor is pulled in Japan so to get a complete one is unlikely. I might be able to get you a computer from a wreck here and I have all the cressida 7M-GE wiring drawings. Rebuilding a loom isn't too scary

I actually have a 7M-GE in the middle of the garage floor complete with loom computer etc.. but expensive to send to Oz from here

good luck getting youre motor, drop me a line if you need help

What year model motor are you after and what $$ are you being quoted?

I can get you a soarer twin turbo front cut, 2.5L six cylinder. COMPLETE as in the front cut STARTS itself. key is in ignition.

shood put that in the old battle axe bj

JAKE wrote:shood put that in the old battle axe bj

i dont like less than 4 litres, and im liking the sound of 8s, so i guess the 6 misses out :(

go a 15b mega cruiser donk been ringin round and they have 1 new dyna wreck here in townsville theres your 4 ltrs + turbo gonna get back to me on a price......he recons under 3 grand I BLOODY HOPE SO...but i dout it

Do a search on the net for 1jz there are a few sites where the 7m is turfed for one, might get lucky there..
Few cressidas on ebay cheap at the moment aswell
Andrew

bj on roids wrote:I can get you a soarer twin turbo front cut, 2.5L six cylinder. COMPLETE as in the front cut STARTS itself. key is in ignition.

price?

ICHIBAN in Moorebank sell the cut for $2250. They also do v8 lexus for thesame and i am yet to find out how much the 280 hp 1gz v12 is:-)
Andrew

wirth teh lexus cut deal - what's tee engine capacity and how hard is it to fit up to standard 80 box? Is it like the VH45 where tha manual mates to GQ box?

Much difference in teh lexus motor to a GXV L'cruiser issue donk?

Just adding to the thread and being a PITA....

Gday
The Lexus v8 is a 4 litre 32 valve motor called the 1uzfe. The landcruiser 1fzfe is in the same family of motors meaning the bellhousings should be thesame bolt pattern. One difference i know of is that the v8 has the starter in the valley vs 1fzfe on the passenger side.
The 2uzfe is a larger displacement 1uzfe being 4.7 and the std landcruiser motor now, used to be mated to the A442 auto when the GXV first came out.
So, at worst, i could buy a std bellhousing ($750) from a 1998 gxv and put it on a A442 auto to put in either a 1uzfe or 2uzfe. What i want to find out next is whether the 1gzfe is thesame bolt pattern, being a v12 5 litre vvti motor, and 280 hp would make for a different transplant in a cruiser.
Andrew Wollongong

Sorry for my late reply fellas but been busy.
Tanks for all your imput but have decide against the swap,
instead looking to by an 80 series dual cab landcruiser,
need a heavier car with better brakes for towing.
thanks anyway

CHEERS

SASS

what about to an early 3f gxl what would be involved????

dow50r wrote:Gday
The Lexus v8 is a 4 litre 32 valve motor called the 1uzfe. The landcruiser 1fzfe is in the same family of motors meaning the bellhousings should be thesame bolt pattern. One difference i know of is that the v8 has the starter in the valley vs 1fzfe on the passenger side.
The 2uzfe is a larger displacement 1uzfe being 4.7 and the std landcruiser motor now, used to be mated to the A442 auto when the GXV first came out.
So, at worst, i could buy a std bellhousing ($750) from a 1998 gxv and put it on a A442 auto to put in either a 1uzfe or 2uzfe. What i want to find out next is whether the 1gzfe is thesame bolt pattern, being a v12 5 litre vvti motor, and 280 hp would make for a different transplant in a cruiser.
Andrew Wollongong

dow50r wrote:Gday
The Lexus v8 is a 4 litre 32 valve motor called the 1uzfe. The landcruiser 1fzfe is in the same family of motors meaning the bellhousings should be thesame bolt pattern. One difference i know of is that the v8 has the starter in the valley vs 1fzfe on the passenger side.
The 2uzfe is a larger displacement 1uzfe being 4.7 and the std landcruiser motor now, used to be mated to the A442 auto when the GXV first came out.
So, at worst, i could buy a std bellhousing ($750) from a 1998 gxv and put it on a A442 auto to put in either a 1uzfe or 2uzfe. What i want to find out next is whether the 1gzfe is thesame bolt pattern, being a v12 5 litre vvti motor, and 280 hp would make for a different transplant in a cruiser.
Andrew Wollongong

O_O

1GZFE wow...if only you could get one...never seen one in oz before. I have a 1uzfe available if anyone wants it.

wow thats diging up an old thread!!!!

here are the stats

1GZ-FE
Type: 4996cc EFI DOHC 48-valve V12
Power: 206kW @ 5200rpm
Torque: 481Nm @ 4000rpm
Gearbox: Floor or column-shift RWD 4sp Auto
Source: 1997-on Toyota Century.