Page 1 of 1
engaging factory diff lock in 2wd (80 series)
Posted: Tue May 16, 2006 10:19 am
by mud4b
just worked out how to engage the rear factory diff lock without going into 4wd.
i have step by step process of how to do it but just wondering if anyone has these options on a aus delivered 80 or how many of you own a sahara..
would anyone like to know how to do it?
Posted: Tue May 16, 2006 10:39 am
by "CANADA"
is that for your fully sick drag racing mark?
Posted: Tue May 16, 2006 1:53 pm
by mud4b
MADZUKI wrote:is that for your fully sick drag racing mark?
sure is dude...
Posted: Tue May 16, 2006 9:26 pm
by hokey
Would be good for some fully hektik wet weather drifting
Posted: Tue May 16, 2006 9:40 pm
by crankycruiser
Yer come on tell us
Posted: Tue May 16, 2006 10:19 pm
by Shadow
does it involve a welder
Posted: Wed May 17, 2006 5:36 pm
by dow50r
Ive got a Sahara, so pass on your info..as it would be good to have that option...the thing ive been trying to find out is how to stop them auto disabling when you get over a certain speed
Andrew
Posted: Wed May 17, 2006 6:40 pm
by mud4b
dow50r wrote:Ive got a Sahara, so pass on your info..as it would be good to have that option...the thing ive been trying to find out is how to stop them auto disabling when you get over a certain speed
Andrew
it has a speed sensor in the diff lock controll box.
i have bypassed this and have done 80k with it still in..
ill get all the stuff together and do a write up.
Posted: Wed May 17, 2006 10:26 pm
by 80UTE
mud4b wrote:dow50r wrote:Ive got a Sahara, so pass on your info..as it would be good to have that option...the thing ive been trying to find out is how to stop them auto disabling when you get over a certain speed
Andrew
it has a speed sensor in the diff lock controll box.
i have bypassed this and have done 80k with it still in..
ill get all the stuff together and do a write up.
I fixed this on the missus 80 when i first got it. The axle difflock ECU has a wire from the speed sensor Pre 08/92 speed sensor for the progressive powersteering/cruise control, post 08/92 from the electronic speedo i just pulled this wire out of the plug at the ECU ( can be snipped but i wanted it reversable ) and there you go the ECU gets no speed signal and stays engaged until you turn it off at the switch. its that easy can have a look at wire colour plug position number if required.
wally