Page 1 of 1
Gearbox identification
Posted: Tue May 16, 2006 11:28 am
by 80diesel4play
Got my well worn 93 model 80 Wagon.
Part time transfer - factory setup - full pov pack - ex SEC car.
Want to work out the gearbox id numbers. ie H150/h151a,b,c,z... etc..
Any place I need to look? Any numbers to check(duh)?
Want to know for sure!
Thanks...
Posted: Tue May 16, 2006 8:23 pm
by toyrex
Have a look on the manifactures plate 5th line down is trans/axle code
first lot of numbers is the gearbox code second lot is the diff
Adrian
www.chevtorque.com.au
Posted: Wed May 17, 2006 10:22 am
by hdj105
If it's a HZJ80 (1HZ) it will be a H150F, but as suggested earlier it will be on the ID plate.
Posted: Wed May 17, 2006 11:49 am
by 80diesel4play
hdj105 wrote:If it's a HZJ80 (1HZ) it will be a H150F, but as suggested earlier it will be on the ID plate.
Yep - thats the one!
Neat as! Now for the search!
Posted: Wed May 17, 2006 5:18 pm
by dow50r
You just missed one on ebay for $550 with transfer...also kits to rebuild these r on ebay for $440. id go that way personally, but b4 u do, try some castrol vmx-m oil in its guts.
Andrew
Posted: Thu May 18, 2006 6:25 pm
by 80diesel4play
dow50r wrote:You just missed one on ebay for $550 with transfer...also kits to rebuild these r on ebay for $440. id go that way personally, but b4 u do, try some castrol vmx-m oil in its guts.
Andrew
Will let you know - the bloke who did my clutch a year ago must have strong armed the damn filler plugs tight, cause a chisel aint moving them at all! But been using a morey's & Mobil 1 Synth mix(1:4) for the last 20,000's with excellent results... I think once I get the filler situation sorted I will know better as well. Will do teh change and then see what happens!
Box is at 335,000 and is sloppy in the gates already... now the extra grunt is making it un happy!
Cheers!