Outer Limits 4x4 Board

my mate put a 4 inch lift in his patrol and the tail shaft rubs on the x member.

I know ou should turn it arround but there are different yokes on each end.

should we jst swap the unijoints around??

can someone thats done this before let me know

cheers

we always just turn them around and have never had a prob.
Mine has been running this way for ever.

If you can't/don't want to do this then your only option is to cut the cross member and plate it in. \___/ sort of like this

we always just turn them around and have never had a prob.
Mine has been running this way for ever.

If you can't/don't want to do this then your only option is to cut the cross member and plate it in. \___/ sort of like this