Show us ya flex
Posted: Sun May 21, 2006 10:45 pm
here is a pic me testing the hungies flex
Show us ya best flex pics
Show us ya best flex pics
Page 1 of 1
Posted: Sun May 21, 2006 11:09 pm
Here's my junk flexing.
Posted: Mon May 22, 2006 6:56 am
only flex shot i have ,the extra heavy duty suspension did what it could
Posted: Mon May 22, 2006 7:59 am
Posted: Mon May 22, 2006 12:30 pm
Do you have aymore info of your diffs and susp?BJ40 3B wrote:Here's my junk flexing.
CHeers, Calvin
Posted: Mon May 22, 2006 5:35 pm
Heres my lil truck 
Posted: Tue May 23, 2006 3:00 am
Cranky what suspension mods do you have ...5 link front ???
Posted: Tue May 23, 2006 3:04 am
The axles are the stock ones, the rear diff is welded, and i have an ARB in the front axle.hokey wrote:Do you have aymore info of your diffs and susp?
The suspension is from a Range Rover, but it's the same as the Defender's and Discovery's.
Other mods, are: disc brakes on all 4 wheels, turbo and intercooler on the 3B engine, oil cooler, power steering, 8274 winch....................
Posted: Tue May 23, 2006 6:46 am
Hey BJ40 3B
whats with the blue brake lines? are they plastic? are the other blue lines just breathers?
what have you got the top of your springs sitting on. it looks like they just sit against your chassis rail. how hard was it to attatch the control arm mounts?
whats with the blue brake lines? are they plastic? are the other blue lines just breathers?
what have you got the top of your springs sitting on. it looks like they just sit against your chassis rail. how hard was it to attatch the control arm mounts?
Posted: Tue May 23, 2006 7:33 am
Hi
One of the blue lines is just the diff breather. The brakes lines are just covered by the same blue plastic lines to protect it from rubbing on something... or just because i had some more meters of spare line
All the supports for the springs and control arms at the frame side are from the RR chassis. Just cutted from the RR chassis and welded to the BJ chassis!
The support for the "A-frame" had to be made to make it fit on the BJ chassis, but had to remove the original fuel tank.
Even some of the axle brackets were from the RR axles.
One of the blue lines is just the diff breather. The brakes lines are just covered by the same blue plastic lines to protect it from rubbing on something... or just because i had some more meters of spare line
All the supports for the springs and control arms at the frame side are from the RR chassis. Just cutted from the RR chassis and welded to the BJ chassis!
The support for the "A-frame" had to be made to make it fit on the BJ chassis, but had to remove the original fuel tank.
Even some of the axle brackets were from the RR axles.
Posted: Tue May 23, 2006 10:31 am
Nah mate shes still 3 link but i have done a flip arm..evanstaniland wrote:Cranky what suspension mods do you have ...5 link front ???
rear is still 5 link as well..
Posted: Tue May 23, 2006 11:38 am
My FJ40
Dave
Dave
Posted: Tue May 23, 2006 12:19 pm
Well looks very tidy:)BJ40 3B wrote:The axles are the stock ones, the rear diff is welded, and i have an ARB in the front axle.hokey wrote:Do you have aymore info of your diffs and susp?
The suspension is from a Range Rover, but it's the same as the Defender's and Discovery's.
Other mods, are: disc brakes on all 4 wheels, turbo and intercooler on the 3B engine, oil cooler, power steering, 8274 winch....................
Great Work