Page 1 of 1
ARB Air Locker
Posted: Fri Sep 19, 2003 11:46 am
by dubb
Just recieved a 9 page fax from ARB head office with detailed requirements for measuring the diff to see it modifications can be made or a similiar already in production locker fitted. I am not skilled enough to 1) take my diff apart and measure 2) Need to drive my car so I would need a second diff. If one of you out there are more mechanical and are interested in air lockers let me no. I couild email or fax the list to you. Great opportunity if we could work something out.
Posted: Fri Sep 19, 2003 12:16 pm
by Ferwoaza
May be worth while getting in contact with Diff Trans Spares in Greenacre in Sydney (should be in white/yellowpages). These guys know these diffs inside and out (welded mine and Mikes).
Posted: Fri Sep 19, 2003 3:02 pm
by murcod
Sounds good Dubb. I don't have the time nor knowledge to pull mine apart though either....
Leon, I'm guessing you'd be interested too?
I can get a breakdown pic of the factory diff parts and also the LSD, if that's any use?
Posted: Fri Sep 19, 2003 3:24 pm
by dubb
Maybe if anyone wants futher info contact Daniel Bongard ARB
dbongard@arb.com.au
Posted: Mon Sep 29, 2003 9:49 pm
by Ferwoaza
Some info I've dug up in relation to this...
Diameter of differential cover 211mm
Rear axle is semi-floating type. 722mm for left wheel, 776mm for right wheel.
Rear Diff Info :
Final Reducation gear ratio : 5.285
Differential Ring Gear :
- Number of Teeth 37
- Outer diameter 185mm
- Gear type : Hypoid gear
Final reduction gear :
- Number of Teeth 7
- Outer diameter 57mm
- Gear type : Hypoid gear
Differential side gear:
- Number of Teeth 14
- Number of inner spline teeth 27
Number of differential pinion teeth : 10
Pinion shaft outer diameter : Ø18mm (that's an omega for some reason..)
Maybe this info will help?? Rear has a removable 3rd member just like a yota....possibilities??