Page 1 of 1
2.8 Diesal dimensions
Posted: Wed May 24, 2006 3:47 pm
by Guy
How big physically is the 6 cyl 2.8 diesal that came out in the early GU's and what is it like wireing wise ??
Length and height are important .. weight is not so much of an issue..
Posted: Wed May 24, 2006 4:50 pm
by stool
650mm Wide from inlet manifold across to oilfilter
850mm long from engine fan to gearbox bellhousing
900mm from sump to rocker cover
To be used as i guide only as all measurements were done by me not nissan .
The Rd28t is nissans RB30 diesel brother and the same block and almost
the rest of the Rb30 bits and pieces.
Posted: Thu May 25, 2006 12:59 pm
by Guy
stool wrote:650mm Wide from inlet manifold across to oilfilter
850mm long from engine fan to gearbox bellhousing
900mm from sump to rocker cover
To be used as i guide only as all measurements were done by me not nissan .
The Rd28t is nissans RB30 diesel brother and the same block and almost
the rest of the Rb30 bits and pieces.
That's what I suspected ..
Thanks for your help I really appreciate it (off to start measuring).