Page 1 of 1
5/120 stud patern on rims?
Posted: Wed May 24, 2006 8:46 pm
by familybus
what does this mean? doesw this stud patern fit a GU? thanks guys
Posted: Wed May 24, 2006 9:06 pm
by shakes
5 stud 120mm pcd I'd assume, cant remember what "pcd" is but its the distance from the 1st to 3rd stud.
Simon
Posted: Wed May 24, 2006 9:10 pm
by HotFourOk
Its means there is 5 studs, with a PCD of 120mm.
PCD for 4 and 6 stud wheels is the distance between opposing studs.
For 5 stud wheels it is as shown:
Where PCD is the widest part of the circle, or S/0.5878.
Patrols take a 6/139.7 wheel.
That is 6 studs, with a PCD of 139.7mm
The ROH site says post-98 Patrols must use 16" or larger wheels? Is this the case? Maybe to fit over the larger brakes?
Posted: Wed May 24, 2006 9:12 pm
by familybus
thanks for that dude! i checked em out and yep they 5 stude! damn no good to me!
Posted: Wed May 24, 2006 9:16 pm
by Gwagensteve
PCD means "Pitch circle diameter"
I know what PCD means only too well.... the G is 5X130mm.... sadly unique to Gwagens and... Porsche
Posted: Wed May 24, 2006 9:35 pm
by HotFourOk
Haha.. that was like my Subaru L series I had... it was 4x140.. the only car that used it was early Peugeots... and they were rare to get and really Grimace looking.. hahah
Posted: Wed May 24, 2006 9:38 pm
by LUX90
5/120 is commodore pattern
Posted: Thu May 25, 2006 12:06 pm
by dromana7411
does anyone know the PCD for pontiac... (weve got a 71 pontiac firebird, and it needs wheels)
Posted: Thu May 25, 2006 12:26 pm
by Ryano
dromana7411 wrote:does anyone know the PCD for pontiac... (weve got a 71 pontiac firebird, and it needs wheels)
5/4.75 or 5/120.65. Same as HQ etc.
Cheers,
Ryano
Posted: Thu May 25, 2006 10:02 pm
by Hardy
PCD 5/120
Series II Discovery
P38a Range Rover
L322 Range Rover
Series 5 & 7 BMW (incl X5)
and maybe a few more...
Hardy