Outer Limits 4x4 Board

will a r151f from a surf bolt to a petrol bundera transfer

badger wrote:will a r151f from a surf bolt to a petrol bundera transfer

No to petrol 22R G52 gearbox
Yes to turbo diesel R151 gearbox

Adrian
www.chevtorque.com.au

my box is a g52 22r box
but it has the landcruiser trasnfer:S

Wont fit the landcruiser transfer.....your options are t/d bundy transfer, prado full time transfer or 100 series 1hz transfer. or an adapter

Andrew

so the r151f from the bundy and the hilux are different where the tx attaches?

basically i have a 22r powered bundera with a g52 and l/c style transfer
i wish to use a r151f when i do my engine conversion
i have sourced a r151f from a surf but will my l/c style transfer bolt straight up to that box
or will i need to get a different transfer

badger wrote:basically i have a 22r powered bundera with a g52 and l/c style transfer
i wish to use a r151f when i do my engine conversion
i have sourced a r151f from a surf but will my l/c style transfer bolt straight up to that box
or will i need to get a different transfer

I don't understand what others have posted, but I thought that the bundy transfer would bolt up wherever a cruiser transfer does. I doubt whether the chain drive hilux tcase (ie what goes behind ur g.box) would have same bolt up pattern but would like to find out for sure.

I have a td bindy box, I will take a pic of where the tcase bolts to it and some measurements. It may be up for sale soon too.

I have a 1990 PZJ70 SWB Landcruiser.. it has a factory R151F gearbox mated to the Landcruiser BF1A Transfer.

i agree slosh, nothing before your post made any sence. i think perhapse my question was misunderstood

how much for that td box? it may save some probs
if not pics would be good

I dont understand why you dont understand....it wont bolt up....your bundy transfer is a 60/70 series cruiser transfer.....if your bundy was a t/d, it would have thesame box and transfer as the pzj70..another type of cruiser transfer...which is thesame transfer as the prado and the 100 series 1hz....made for a r151...
You could bolt a h55 5 speed as in 70 series to your cruiser tranfer, or a t700 plus adapter...as in v6 holden or v8
Andrew

if u look at your diffs, they are off centre....thats why u need to run cruiser transfer...MAYBE u can run a lux transfer (as in surf) and get away with it...the transfer that bolts to the r151 is different in the mounting to the g or w box....check oout marks adapters...maybe they can adapt it to something

so the td bunderas with the r151 have the newer style transfer?

just trying to figure out what goes to what so i know all my options as finding a bundera td r151 is rather hard and expensive to come by

thanks for your replys dow50r u cleared up a few things