wing removal
Posted: Sun May 28, 2006 8:01 am
What`s the go with getting front wings off a GQ. Is it all bolts after removing doors for access or are there any spot welds?
Cheers Alex
Cheers Alex
Page 1 of 1
Posted: Sun May 28, 2006 10:13 am
what do yoy meanby front wing?
front guards
Posted: Sun May 28, 2006 10:54 am
the front guards(wings) are bolted and glue i think from memory
Cheers Bourkey
Cheers Bourkey
Posted: Sun May 28, 2006 5:35 pm
I mean the part where the Patrol 4x4 badge is. Anyone renewed them? Screwed and glued? Any procedure for removing them for replacement?
Alex
Alex
Posted: Mon May 29, 2006 9:33 pm
long flat piece of steel and slide it along under neath
(note this will scratch car)
(note this will scratch car)
"wings"
Posted: Mon May 29, 2006 9:57 pm
try a hair dryer and peel carefully
Posted: Mon May 29, 2006 10:29 pm
claw hammer
Posted: Wed May 31, 2006 6:04 am
sorry guys I don`t mean the badge itself but the whole front gaurd. I can see where it bolts along inner gaurd and would asume there may be a few other bolts once door is removed for access. It`s just that if there are no dramas with spot welds I may renew them as I have bubbling on the edges.
Alex
Alex
Posted: Wed May 31, 2006 7:32 am
remove the plastic inner guard, undo the screws "in" the engine bay, open the door and you can unscrew the last 2 .... no problem at all ...
gaurd
Posted: Wed May 31, 2006 9:45 am
to quote chops
claw hammer
im sure itd still work
claw hammer
im sure itd still work
Posted: Wed May 31, 2006 7:44 pm
Thanks Hobbz. That`s what I was hoping.
Alex
Alex