Page 1 of 1
80 series 3 inch lift
Posted: Tue May 30, 2006 5:45 pm
by scottmcguinness172
hey all im looking at buying a 3 inch lift for my 80 do i have to take the sway bars off so it clears the front tail shaft cheers thanks
scott
Posted: Tue May 30, 2006 6:51 pm
by sniper
why not just extend them down?
Posted: Wed May 31, 2006 6:03 am
by scottmcguinness172
like just make some spacer blocks for the front or something ill have to look in to it cheers thanks
Posted: Wed May 31, 2006 1:43 pm
by ats4x4dotcom
we do a kit which gives you sway bar spacer blocks, bump stop spacers for rear, new top plate for shock mount, and longer front shock, so you have a 10" front travel shock, and a 12" rear shock travel, with 3-4" springs.
You need aprox 35mm spacer for long shocks on the front sway bar.
Posted: Wed May 31, 2006 6:52 pm
by BLC
i just recently did a 3 inch lift on my POS
sway bars dont fit back in.. i made spacers for the front out of 25mm square steel tube
the rear im still making cause im a slacker
Posted: Wed May 31, 2006 7:17 pm
by ats4x4dotcom
we extend the links on the rear, stop them hitting the shocks.