Page 1 of 1
Zook shops
Posted: Thu Jun 01, 2006 4:25 pm
by Shorty40
Does anyone know of zook shops that might have a Vitara auto in stock ?
If you don't know about stock, just shop names would be good (and numbers)
I have advertised in the wanted section for a box, but I am asking here for contact details
Cheers
Posted: Thu Jun 01, 2006 4:41 pm
by "CANADA"
SUZIWORX
Unit 1, 18 Kayleigh Drive
Maroochydore Q 4558
Phone: +61 7 5479 1877
Fax: +61 7 5443 8150
Email:
mark@suziworx.com
Posted: Thu Jun 01, 2006 6:23 pm
by christover1
http://www.suzishop.com/forum/default.asp
All the good ones are linked on left side of this forum
christover
Posted: Thu Jun 01, 2006 7:33 pm
by nicbeer
Also suzukishop in perth.
http://www.suzukishop.com.au/
Nic
Posted: Thu Jun 01, 2006 8:43 pm
by bazooked
i got 1
, but im in perth.
Posted: Thu Jun 01, 2006 8:45 pm
by Drew
but is yours a 3 spd graham
Posted: Thu Jun 01, 2006 8:56 pm
by nicbeer
Dont u need a Jimny auto Shorty40 as i thought u were using a M13 engine not the G13/G16.
or parts are swappable.
Nic
Posted: Thu Jun 01, 2006 9:25 pm
by Wanderer
any other places in Perth?
Posted: Thu Jun 01, 2006 9:39 pm
by nicbeer
Suziwest or try some of the normal wreckers.
Nic
Posted: Thu Jun 01, 2006 10:04 pm
by Shorty40
Thanks guys - looks like I have one
Mark @ SUZIWORX to the rescue again
BTW - Nicbeer, I do have the M13a, but i am going to run the Vit 3 speed as it is stronger and also the Jimny auto is computer controlled (pain in the ass)
Posted: Fri Jun 02, 2006 8:37 pm
by lay80n
Off topic slighty - the vit 3 speed is a tri matic right??
Layto....
Posted: Fri Jun 02, 2006 9:02 pm
by Vineboy
Really... as in Holden Trimatic?
Posted: Fri Jun 02, 2006 10:52 pm
by Shorty40
Yes they are very similar. The input shafts are different sizes.
Thats why they are a reliable box in a small zook