G'day fellas,
I got hold of a winchbar, winch & siderails for my 75 ute but they are off a 79 ute (not ifs), the bar went on no problems but the siderails were a bit tricky, i eventually got them on but there are two lugs that point down & back at about a 30 degree angle from the floor on the bottom of the bar that connects to the chassis, just to give you a mental picture...you could connect a bar between them under the x-member.
now the question, does anyone know what these lugs are for???
if they are not needed, I'll just grind them off beacause they hang down about 30-40mm below the x-member.
thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
78/79 siderails to a 75
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests