Outer Limits 4x4 Board

as states im chasing a fuel filler hose that is flexible as i need to bend it around stuff

I'm after some stuff also. Going to do some ringing around tomorrow and see what I can come up with.

i think this place , call hyperfluid in tradelink rd browns plains, speak to bob tell them i sent you they will look after you. or lewis hoses and seals randall st slacks creek, speak to darren tell them i sent you .

I got some for the lux from a place on Ipswich road. Can't remember the name. In the rocklea area just past the Donaldson over pass outbound left hand side.

try tony powell
thers one in geebung & one in salisbury
http://www.tonypowell.com.au

basketcase wrote:I got some for the lux from a place on Ipswich road. Can't remember the name. In the rocklea area just past the Donaldson over pass outbound left hand side.

how flexible is it dan can it make a 90 degree bend also is it corrigated (sp) i was thinking today to get two fuel fillers and cut and join

I got some from Tony Powell (238 Robinson Rd Geebung) today it isn't the most flexible stuff in the world but he said with persuasion it would flex enough for the job. 400mm cost me $14

BigMav wrote:I got some from Tony Powell (238 Robinson Rd Geebung) today it isn't the most flexible stuff in the world but he said with persuasion it would flex enough for the job. 400mm cost me $14

maybe i should get two hoses and join them to get a 90degree bend

you could probably do that, they have tonnes of stuff in that place, but it would be another place it could leak from. The ph. no is 32651144

Tony Powell lives next door to me

Yeah go to his work, he's got heaps of hoses