Page 1 of 1
cross member
Posted: Thu Jun 08, 2006 7:39 pm
by mangie
I just noticed something, my front drive shaft is hitting the chassis cross member. How do you guys fix that, cut out a section of the cross member, or move it back?????
Regards
Posted: Thu Jun 08, 2006 7:52 pm
by DaveS3
Just scollap the crossmember, cut a V section out and weld in some new plate.
Works well
Dave.
Posted: Thu Jun 08, 2006 9:29 pm
by mickrangie
another thing i have to do..... mine knocked the greese nipple right off
Posted: Thu Jun 08, 2006 9:53 pm
by Loanrangie
Get a front shaft from a t/flite auto rangie, shaft is solid not hollow tube so will give another 1" or there abouts of clearance.
Posted: Thu Jun 08, 2006 10:16 pm
by mickrangie
i'll steel craigs when he's not looking
Posted: Fri Jun 09, 2006 8:06 am
by Loanrangie
Posted: Fri Jun 09, 2006 10:46 am
by DL
Hi Mangie,
Is that with the BW35 you got from me? I have the tube cross member that I'm not going to use with the C9. Gives about another 75mm clearance. Yours if you want. Still have the driveshafts too.
DL
Posted: Fri Jun 09, 2006 11:30 am
by mangie
Ummm, I don't know what a BW35 is, so I doubt if I've bought one.
Maybe there are two Mangies?????
Posted: Fri Jun 09, 2006 12:02 pm
by DL
Hi Mangie #2,
There must be two. There is a Mangie from Blackburn, Melbourne Vic who I gave the BW to.
DL
