Outer Limits 4x4 Board

Hello

Sorry been a while have not showed up.
I moved to Atlanta and at the same time faced a close family tragic loss.

Will the Maxidrive set up ( ARB RD56 with 4.75 Ring and Pinion and 24 spline MD axles rear and front) fit a defender 110?

I m pretty sure the rear diff/ARB of the disco will not fit the rear of a D110 as it is a salsbury.
What modification is needed in the rear to make it fit?

Won't the MD Disco 24 spline rear axles fit the D110 any ways?
What about the front diff, axles and CV's?

Thanks

Jay

The front diff centre is the same between a disco and a 110. So your ARB will fit. The differences are in the hubs, CVs and stub axles. So if you have 24/23 spline MD front inners, then you just need to buy some AEU2522 (110 county CVs - or ashcroft cro-mo 2522s) and everything will fit (will also need new drive flanges if the 110 is a post 1990 model).

For the rear nothing will fit, you are better off selling the rear locker and buying a MD locker for a salisbury (which is much cheaper than for a rover diff anyway).