Outer Limits 4x4 Board

i want to make one has any ones desien work awsome or do just use like 4 high tensile that bolt on to some some flat plate with a heavy walled tube in between.

What are u after to tow?

Are you after a typical tounge style or reese style.

Nic

here is the one i built for my old LWB, it was setup to use a standard 50x50 RHS hayman reece style tounge

It has 8mm plate inside the chassis, 75x75x4RHS between then the tonge was welded to the side and gusseted


During construction


Almost Finished

i just want it so i can put a snatch on it and a tow ball for towing our little boat. i was thinking reece so i can have two one with a tow ball and one with a hook.

Be careful, the sierra's legal max towing weight is only 450KG. Make sure that you can legally tow ya boat before you look at building a towbar for it.
There is a thread recently bout towing with a zook.
Layto....

bub, Nice bar. do you have any finished photos ? and where did you place the lights ?

never finished it as i sold the zook, i mounted the taillights into the rear door