Page 1 of 1
wtd roll cage specs /designs
Posted: Mon Jun 12, 2006 1:05 pm
by Fleming
Im in neeed of a roll cage for my swb 40series. Im wanting designs and specs before i start. Its only for the weekend but i want to be safe if i roll it ... cheers my email; is FLEM_40@hotmail.,com if you want to directly email to me thanks.Also a supplyer of tubing if everybody goes the same shop in sydney that is! Thanks for your time and effort . also pics on how it mounts at the front (6 point)and close surrounding area (im thinking about feeding it thru the dash ).
Posted: Mon Jun 12, 2006 7:15 pm
by Hardcorr
Hopefully some pics and details will be posted up. I've also been looking into a rollcage for my 40 Shorty, but I'm going to do it out of thickwall tubing and build it in car. I will be using a notcher to fit the piping together, and a Tig to weld it up.
I've been surfing the net to look into differing designs, there are quite a few out there.
Cheers
Corry
Posted: Mon Jun 12, 2006 7:29 pm
by pcman
www.ih8mud.com
then theres a link to cages HEAPS to choose from
Posted: Mon Jun 12, 2006 8:47 pm
by bj42turbo
Hope they dont mind but the yellow one is
Daz's and the red one is
Matt's
BJ
Posted: Mon Jun 12, 2006 9:39 pm
by Fleming
how does it bolt to the floor next to the accelerator pedal without interfering with the door and pedal or is the pedals bent to the lefty and thinner diameter doors fitted thanks i got as few photos of the yellow one im looking towards that ..... and the material used is .... bj do you make these yourself .?