Outer Limits 4x4 Board

I'm wondering if a crank pully off a 1.6 will fit onto my 1.3. Supercharging (4agze style blower) and need to run an extra belt. Any other idea's or answers would be very helpful.

The G13BA's in the coily sierras have a double crank pulley. I know this doesn't answer your question, but it gives you another place to look.

hey gutless, are the belts v or multi ribbed?

am i correct in saying you might need a multi ribbed for a 4agze blower?

yes you will need a multi ribed like the 16valves run, but im pretty sure the yota blowers are a wider multi.

are all the coily model pullys the same ( width/ diameter) or is there a certain model i have to get hold of? And does anyone know what sort of psi am i looking at receiving from the coily pully and stock blower pully?
Thanks for the info on the coily.

from memory the yotas run about 12 to 14 psi but i could be wrong, you will have to work it out as to wat psi u will end up with.

all coily pulleys will be the same. They are multi ribbed, but I have no idea how wide hey are sorry.

bazooked wrote:from memory the yotas run about 12 to 14 psi but i could be wrong, you will have to work it out as to wat psi u will end up with.

SC12's run an average of 7psi with stock pulleys.

You probably dont want to be running anymore than that through a zook engine.

about 5 pound is about what i am aiming for. i dont want to build a powerhouse, just want to give it bit of giddy up in the scrub. thanks for the info. is there any web sites i can get the specs of the 4agze?

www.twincam.org

Search is your friend

or goto to google and type in:
Billzilla

I used to be a corolla nut before i bought the zook.
Jayden

thanks heaps.