ARB Bar to Winch bar - clues
Posted: Sun Jun 18, 2006 9:49 am
I've got myself a ARB STD bar to suit my 85 Rangie. I need to mod it to fit a winch and the body lift.
I can work off photo's for the front gussets, but it would help if I had a photo or know how the winch plate was mounted.
Is the winch plate welded in postion or is it bolted, is it 5mm thick or 4mm there should be some gussets too.
Email me any photo's you may have of the inside of the bar.
One other thing. Is the winch mounted with the mounts facing down or forward. Cause if I mount it it down I will need more bracing, and if I mountit with mounts forward it will be hard to get the clutch, cause my cheapy winch does not offer adjustment.
I can work off photo's for the front gussets, but it would help if I had a photo or know how the winch plate was mounted.
Is the winch plate welded in postion or is it bolted, is it 5mm thick or 4mm there should be some gussets too.
Email me any photo's you may have of the inside of the bar.
One other thing. Is the winch mounted with the mounts facing down or forward. Cause if I mount it it down I will need more bracing, and if I mountit with mounts forward it will be hard to get the clutch, cause my cheapy winch does not offer adjustment.