Page 1 of 1

What switches do u use for duel fuel?

Posted: Sat Jun 24, 2006 2:19 pm
by Mulisha
Hi guys i have a 88 mav and it has duel fuel and i was woundering has anyone set up there car so that the switches are in the factory holes?



What i mean is i have a primer switch and a swicth to transferr from petrol to gas and they just zip tyed to the the bottom of my thing that tells me how much gas i got left.



I was woundering in the middle console on my XLT Mav i have like 4 spare switch holes there to fit some and thought maybe you guys got hold of someone that sells switchs to fit these cars as all the swicths i look at are to small or to big and won't fit



Could you maybe post how you have yours set up in or something like that.



Cheers guy in advance

Posted: Sat Jun 24, 2006 2:46 pm
by Mulisha
Here are a few pics of what i mean becuase what i typed made no sense at all sorry.

A pic of what my set up looks like now and a couple of pics of were i would like to put them. I wouldn't mind trying to get a switch to fit in beside difflock for the one to transfer from gas to petrol :cool: :D :D

Image

Image

Image

Posted: Sat Jun 24, 2006 3:31 pm
by viet667
I have LPG gauges with a LPG/ Petrol rocker switch built in that fits into the Nissan plastic blanks. It will do away with your 2 cable tied units and look much neater. They do not have a primer though, with that I have a small automotive type push buttons which can be fitted into 12mm hole in another blank panel.

Posted: Sat Jun 24, 2006 4:32 pm
by Mulisha
Could you maybe post some pics of them for me please also were you got them from because that sounds exactly like i want :D :D :D

Cheers man Thanks heaps

Posted: Sat Jun 24, 2006 4:42 pm
by waynejo1
try http://www.juland.com.au there in melbourne they make gas switches that fit in the orignal cut outs

Posted: Sat Jun 24, 2006 5:42 pm
by Mulisha
Thanks man for the 500 series or any of them do you have a rough price figure?

Cheers man that's exactly wanted i wanted :cool: :cool:

Posted: Sat Jun 24, 2006 10:07 pm
by marin
I have 1 with gauge and switch that fits in a standard switch spot, i payed $65 for it a year and a half ago.

In terms of where you should put it, i would suggest you move the light that i'm guessing is for your alarm elsewhere, possibly into the blank next to the heater controls, and put the gas switch/gauge up front next to the rear wiper switch where you can easily see it, instead of somewhere that it can be knocked easily and is not easily seen whilst driving.


marin

Posted: Sat Jun 24, 2006 10:19 pm
by Mulisha
Yeah i might do that marin i hope the one i want to get doesn'r cost much over $65 :lol: