Page 1 of 1
help with power
Posted: Sat Jun 24, 2006 5:43 pm
by bluezook
hi all i have a lwb zook with a 1.3L, 31"tyres, 1L transfer extractres with 2" pipes and thats it and i need more power its to slow (i know that a zook for you)
now i have $1000 to spend how can i make this motor go a bit better with out going to a 1.6L would the g13bb fuel injuction be the go
Posted: Sat Jun 24, 2006 6:09 pm
by bluezook
its all ok im going to a 1.6L i found one for $500
Posted: Sun Jun 25, 2006 8:21 am
by moose
i have 1.6 bottom end , 1.3 head , extractors , 1 litre transfer & run 33,s !!
it is ( in my books) reasonably quik , for wat it is !!!
plenty power off road as well !!!
Posted: Sun Jun 25, 2006 3:21 pm
by bluezook
what speed dose it do on the high way
Posted: Sun Jun 25, 2006 11:36 pm
by OVERKILL ENG
Cousin Baught a 1.3 Baleno engine must be a freak engine. Runs standard transfer hilux diff with 4.88 and 32's never goes offroad but will sit on 120kmh on the freeway all day long. Got the motor wiring and computer for $800
SAM
Posted: Mon Jun 26, 2006 9:46 am
by moose
bluezook wrote:what speed dose it do on the high way
cruise at about 100-110 !!!(on the flat)
loose,s a lil' bit up hill , not too bad thou !!!
anything over 120 in a SWB zook , is just scary anyway !!!!
Posted: Mon Jun 26, 2006 12:22 pm
by Snakezooki
I have a Gti botton end, with a standard head on it, rokhoppa 3 and 33s, and i can cruise on 110, 120.
It feels like it would do more but as moose said, anything over 120 is scary......
Posted: Mon Jun 26, 2006 1:00 pm
by nicbeer
Snakezooki wrote:I have a Gti botton end, with a standard head on it, rokhoppa 3 and 33s, and i can cruise on 110, 120.
It feels like it would do more but as moose said, anything over 120 is scary......
U got a gti head on it or a g13 carb head??
Nic
Posted: Mon Jun 26, 2006 3:21 pm
by Snakezooki
G13 carb head.
The GTI bottom end just revs a lot more freely and harder....
Theres nothin like watchin the Taco needle go straight through the RED section, It revs to about 8400, cant tell exectly, my taco only goes to 8000. it turns red at 6500.
Dont know what was done to the GTI bottom end b4 i got it.
it came from a fella in QLD that does uphill racing.
Posted: Tue Jun 27, 2006 12:15 am
by Klappers
Snakezooki wrote:G13 carb head.
The GTI bottom end just revs a lot more freely and harder....
Theres nothin like watchin the Taco needle go straight through the RED section, It revs to about 8400, cant tell exectly, my taco only goes to 8000. it turns red at 6500.
Dont know what was done to the GTI bottom end b4 i got it.
it came from a fella in QLD that does uphill racing.
Shit.....
Crazy