Page 1 of 1
lockless rebuild
Posted: Mon Jun 26, 2006 10:52 am
by andrew e
Finally started the rebuild on the Ex haultech lockless monster. It was rolled, then stripped of its shocks, motor/box and stuff to build the rentals. Motor and box is sitting back in place, and i'm starting on the brakes/wiring etc.
Specs will be
16" race runners
mid mounted 3.9/zf ex 95 disco.
traction control
LSD toy diffs
front/rear axle winches
36 irocs on beadlocked 15x10s
rear radiator
4 link rear
3 link front
Keep tuned
Andy
will post pics when possible.
Posted: Mon Jun 26, 2006 11:43 am
by Micka
Can I ask why you are choosing to run IROKS?
If you are doing any rock crawling events, I would be staying well clear of them. I have not seen a more over rated tyre.
You would be much better off on a set of comp spec claws, creepies, or krawlers for any competition work.
Hell...even MT/Rs perform better than IROKS.
Micka
Posted: Mon Jun 26, 2006 11:07 pm
by Tim D
I miss seeing this rig, bring on the pics
Posted: Mon Jun 26, 2006 11:29 pm
by andrew e
im using IROKs because i have some. May change them in the future depending on if i like them. I didnt use krawlers (1st choice) as i already have my beadlocked 15x10s. same thing for mickeys too and cost . would have had 37 boggers if they were available for the $$. will be entering as many events as i can afford, first preference being werock events
Andy.
ps How the heck do i post pics?
Posted: Mon Jun 26, 2006 11:30 pm
by "CANADA"
Did you end up using any of the 2A ??
Posted: Tue Jun 27, 2006 2:36 am
by ISUZUROVER
Sounds interesting - any pics???
Sam let me drive the lockless a long while back, it was so much fun I broke a CV
Posted: Tue Jun 27, 2006 6:29 am
by evanstaniland
look forward to seeing some pics...as for posting this might help
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=75268
Evan...
Posted: Tue Jun 27, 2006 7:04 am
by RUFF
ISUZUROVER wrote:Sounds interesting - any pics???
Sam let me drive the lockless a long while back, it was so much fun I broke a CV
Different Lockless. This is the Defender i drove at TTC and Sam rolled on flat ground at Superior All Terrain
Posted: Tue Jun 27, 2006 5:11 pm
by uninformed
tony, was there a vehicle reason why it didn't go to obc?
how was it to drive at some speed?
never got to see enough of this rig, has to be one of the best rovers to go to comp
serg
Posted: Tue Jun 27, 2006 5:55 pm
by ISUZUROVER
RUFF wrote:ISUZUROVER wrote:Sounds interesting - any pics???
Sam let me drive the lockless a long while back, it was so much fun I broke a CV
Different Lockless. This is the Defender i drove at TTC and Sam rolled on flat ground at Superior All Terrain
Ah, so this is the 2nd incarnation of the lockless - that explains things - I though roc7oy had bought the remains of the 1st...?
Even cooler - are you keeping it the same colour Andrew?
Re: lockless rebuild
Posted: Tue Jun 27, 2006 10:17 pm
by A1
andrew e wrote:
Specs will be
16" race runners
mid mounted 3.9/zf ex 95 disco.
traction control
LSD toy diffs
front/rear axle winches
36 irocs on beadlocked 15x10s
rear radiator
4 link rear
3 link front
I dont see the under guard water squirter ....I seen Tony get 1 or more people with this @ TT 05 
Keep tuned
Andy
will post pics when possible.
Posted: Tue Jun 27, 2006 10:38 pm
by -Mandy-
ISUZUROVER wrote:I though roc7oy had bought the remains of the 1st...?
This was the Jeckyl (sp?)..POS's old tube buggie.
Posted: Wed Jun 28, 2006 12:59 am
by ISUZUROVER
-Mandy- wrote:ISUZUROVER wrote:I though roc7oy had bought the remains of the 1st...?
This was the Jeckyl (sp?)..POS's old tube buggie.
OK, so what became of the lockless (buggy) chassis? One of the "rentals" or the "homeless" buggy? I have lost track...
Sorry for the hijack Andrew.
Posted: Wed Jun 28, 2006 7:40 am
by Daisy
ISUZUROVER wrote:-Mandy- wrote:ISUZUROVER wrote:I though roc7oy had bought the remains of the 1st...?
This was the Jeckyl (sp?)..POS's old tube buggie.
OK, so what became of the lockless (buggy) chassis? One of the "rentals" or the "homeless" buggy? I have lost track...
Sorry for the hijack Andrew.
Jekyll (POS's old buggy) - the 'Roctoy Designfab' buggy
Lockless buggy - now the blue buggy owned by 2manytoys (Shane Homan)
Lockless Defender - the topic in discussion owned by Andrew.
Homeless buggy - now with Troll00 (damien and Case)
One of the rentals - looked after by 80lsy GQ and is the Judges comp car
The other rental - sent down to overkill and now driven by GURU.
Hope thats all sorted
Posted: Wed Jun 28, 2006 12:36 pm
by Mad Cruiser
ISUZUROVER wrote:-Mandy- wrote:ISUZUROVER wrote:I though roc7oy had bought the remains of the 1st...?
This was the Jeckyl (sp?)..POS's old tube buggie.
OK, so what became of the lockless (buggy) chassis? One of the "rentals" or the "homeless" buggy? I have lost track...
Sorry for the hijack Andrew.
You've been gone too long
Time to come back home and get into the scene again
Posted: Wed Jun 28, 2006 8:34 pm
by ISUZUROVER
Mad Cruiser wrote:
You've been gone too long
Time to come back home and get into the scene again
Thanks Mandy! You are right MC, time to stockpile some mog axles and come home.
Andrew... back on topic... are you keeping it orange??? And are you keeping the offset 3-link at the front? I would be interested to hear your opinion of how it behaves.
Posted: Wed Jun 28, 2006 11:11 pm
by andrew e
ISUZUROVER wrote: are you keeping it orange??? And are you keeping the offset 3-link at the front? I would be interested to hear your opinion of how it behaves.
mabe orange, but then its still the old haultech defender. i was leaning towards reef blue metalic hammertone - brush applied
for now i will see how the haultech 3 link goes.
Andrew
Posted: Thu Jul 06, 2006 4:30 pm
by bushy555
Posted: Fri Jul 07, 2006 7:11 pm
by andrew e
thanks dave i have worked out how to post pics now. I'll keep the topic going in the members section.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=80147
Andy
Posted: Thu Jul 20, 2006 7:18 pm
by Slunnie
Posted: Thu Jul 20, 2006 9:19 pm
by GURU
what are your plans for the rear??
hope you don't do the tapered rear panel....make a tray
good basis to start with though
Posted: Thu Jul 20, 2006 11:29 pm
by TLCOR
What's the deal with the front suspension? I want more pics from the previous state and full specs?!
Posted: Sun Jul 23, 2006 9:54 am
by andrew e
It got some paint the other day....after i cut off a hell of alot of bracket off the chassis that werent needed. probley saved, oh, about 2 or 3 kgs
naah stuff the tray idea too heavy. the dovetail will return for some comps, then others where i have to cover the wheels... i'll think of something. Anyone got a rear lwb tub laying around?
The front suspension is a 3 link + panhard with the stock 2 bottom links, with their front eyes cut off, and 1 upper link on the drivers side mounted a bit behind where the origional engine mount was. I think if the motor was in its stock location ( about 450mm foward from where it is now) the exhaust manifold would hit. I'll put up some pics later. Speaking of pics in its previous state, does anyone have any? my computer crashed and i lost them all
The rear B pilar rollcage mount is mounted to the support for the cab.
because i'm not running a heater, does anyone know if i can use the front top heater hose port on the intake manifold for the expansion tank? if not can i plug it off, or does it rely on flow to cool the manifold?
Andy
