Page 1 of 2
HILUX/4RUNNER Exo Cages/Tube Bars/Tube Doors
Posted: Mon Sep 29, 2003 10:30 am
by bubs
I will post some hilux / 4 runner ones here, every one help by postin up some pics of exo you have seen which you like
heres 2 1st gen ones - both
Posted: Mon Sep 29, 2003 10:31 am
by bubs
heres 2 2nd gen luxs
the blue one is tin benders new rig and this is one of the cleanest looking exo out there
Posted: Mon Sep 29, 2003 10:42 am
by bubs
another tin bender exo on a runner
and frostys 4 runner
Posted: Mon Sep 29, 2003 10:45 am
by bubs
booger welds old 4 runner
and ians30? x-cab
Posted: Mon Sep 29, 2003 10:46 am
by bubs
big toys 4runner
Posted: Mon Sep 29, 2003 3:30 pm
by Pesky Pete
Bubs
Mine will be similar to the red one, except that the main bar behind the cab will be 75 mm x 5 mm steam tube. The rest will be 50 mm tube. Waiting to get the coils under it first, then I'll start the barwork.
Cheers
Pete
Posted: Mon Sep 29, 2003 8:07 pm
by RUFF
You want EXO pics
I got Exo pics
Posted: Mon Sep 29, 2003 8:09 pm
by RUFF
Got a lot of Tube front bar pics i will add as well
Posted: Mon Sep 29, 2003 8:10 pm
by RUFF
Posted: Mon Sep 29, 2003 8:11 pm
by RUFF
Posted: Mon Sep 29, 2003 8:13 pm
by RUFF
Posted: Mon Sep 29, 2003 8:15 pm
by RUFF
Posted: Mon Sep 29, 2003 8:17 pm
by RUFF
Posted: Mon Sep 29, 2003 8:22 pm
by RUFF
Posted: Mon Sep 29, 2003 8:24 pm
by RUFF
Posted: Mon Sep 29, 2003 8:25 pm
by RUFF
Posted: Mon Sep 29, 2003 8:27 pm
by RUFF
Posted: Mon Sep 29, 2003 8:29 pm
by RUFF
Posted: Mon Sep 29, 2003 8:30 pm
by RUFF
Posted: Mon Sep 29, 2003 8:33 pm
by RUFF
Posted: Mon Sep 29, 2003 8:35 pm
by RUFF
Ive got some Tube Door Pics as well
Posted: Mon Sep 29, 2003 8:37 pm
by RUFF
Posted: Mon Sep 29, 2003 8:39 pm
by RUFF
Posted: Mon Sep 29, 2003 8:40 pm
by RUFF
Posted: Mon Sep 29, 2003 11:35 pm
by Surfection
finally.... two ruff doesn't have !! You can't half tell someone's been doing their research !!
{the green runner makes me all goey}
Posted: Tue Sep 30, 2003 7:49 am
by bubs
Awesome work tony
Posted: Tue Sep 30, 2003 9:57 am
by Singo17
Ruff any place to get more info on the Charcoal/Black Ute with the bar work ruuning through the front 1/4's. Very nice bar work and looks to be streetable here with a little less tyre width.
Posted: Tue Sep 30, 2003 7:11 pm
by RUFF
Basicaly the pics i have is all there is. Tinbender over on the Pirate Board did the work on it and the guy who owns it is Tailight. So PM either Tin bender or tailight on pirate they may have some info.
Posted: Wed Oct 01, 2003 2:16 pm
by bubs
couple more
Posted: Wed Oct 01, 2003 2:18 pm
by bubs
this thing was sick