Page 1 of 1
Hi Steer 80 series
Posted: Thu Jun 29, 2006 4:59 pm
by jimbo jones
Dose any one no if there is a Hi Steer avalible to lift the tie rod up and away from the front arms at the moment there's only about 4mm clearnce and I'm shoure it tuches every now and then.
Posted: Thu Jun 29, 2006 8:44 pm
by CruiserCruising
I have seen this done i saw a bloke at blackrat this year who had just done it but i cant remember who it was sorry.
Posted: Thu Jun 29, 2006 10:03 pm
by Coighty
Hi steer will not fix your problem. To get clearance you need to flip the radius arms. Your steering is in front of your diff. And yes it probly does touch on full travel.
Posted: Fri Jun 30, 2006 12:19 am
by jimbo jones
Coighty wrote:Hi steer will not fix your problem. To get clearance you need to flip the radius arms. Your steering is in front of your diff. And yes it probly does touch on full travel.
I'm talking about the arm behind the diff that go's from hub to hub the tie rod
Posted: Fri Jun 30, 2006 11:36 am
by dow50r
Jimbo...take one arm off at a time and grind the casting marks off it where it is touching....that will give you enough....when the wheels are at full lock, it will touch....and wear the rear rod.a bit.
Andrew