Outer Limits 4x4 Board

Posted: **Thu Jun 29, 2006 10:55 pm**

Hi Guys,

I'm chasing pics of how people have installed Roctoys transfer rings, whether using the exsisting mounts or mounts directly onto the chassis.

Also chasing pics of trac bars.

My Zook is a 96 leaf Sierra

I've done the searches and read the threads but all the pics are GOOONE

Posted: **Thu Jun 29, 2006 10:56 pm**

u can come over and have a look at mine if u want

Posted: **Thu Jun 29, 2006 11:01 pm**

Hey Josh,

Have you got the transfer mount and trac bar?

Posted: **Fri Jun 30, 2006 9:47 am**

just the transafer case ring and standard mounts connected up with the tranfer

Posted: **Fri Jun 30, 2006 10:22 am**

Got any pics of that as i am looking at doing same thing.

Nic

Posted: **Fri Jun 30, 2006 10:36 am**

no pics but its in my project sitting in the garage

Posted: **Fri Jun 30, 2006 8:39 pm**

Posted: **Fri Jun 30, 2006 9:08 pm**

This is how I did mine.
Had to trim the ring a bit to clear the floor with no body lift.
Made a bolt on bash plate for the bottom.
It mounts the same as the stock setup but uses the poly bush kit from roadless gear (really just poly swaybar end link bushes).
I dont have any pics of it installed yet.
Paul.

Outer Limits 4x4 Board

Chasing Pics of Transfer Ring Install and Trac Bars

Chasing Pics of Transfer Ring Install and Trac Bars