Page 1 of 1
mk front diff change Q
Posted: Wed Jul 05, 2006 10:32 pm
by GOT MUD
i search the bible with no luck but was wondering if anyone has ever replaced the c200 with something from another model etc we have killed the crown wheel and pinion in ours and have another centre that was spare but found that it has 12mm bolts and the one we killed has 14mm bolts in relation to re-fitting the locker
cheers
Posted: Fri Jul 07, 2006 7:06 pm
by GOT MUD
ok maybe know one can answer the first q but has anyone know off or have done a complete front diff swap from another nissan etc in to an mk forget the leaf/coil thing cause we could work around that
cheers
Posted: Fri Jul 07, 2006 7:56 pm
by badger
pathfinder rear is c200 i think
mab it uses different bolts
where u at i kno where there is heaps of mq diffs going cheap if u in bris
Posted: Fri Jul 07, 2006 7:59 pm
by GOT MUD
yeah in caboolture but wheres the diffs at
pathfinder rear would be good for centre but the whole diff fitted under would make it abit hard to steer
Posted: Fri Jul 07, 2006 8:33 pm
by Hoppy11
What about the front diff from the first GQ utes, they used a GQ front diff, not the c200 and they also ran leafs and MQ gaurds, making them the same width, just a different ratio, easy changed though.
Hoppy
Posted: Sat Jul 08, 2006 7:22 pm
by Screwy
Hoppy11 wrote:What about the front diff from the first GQ utes, they used a GQ front diff, not the c200 and they also ran leafs and MQ gaurds, making them the same width, just a different ratio, easy changed though.
Hoppy
that would of been my bet.
Posted: Sat Jul 08, 2006 8:43 pm
by badger
they r in redcliffe
pm zero
hes your man
Posted: Sun Jul 09, 2006 9:19 pm
by GOT MUD
thanks for the replys we were checking out leaf gq today so it might be the go will shoot a pm to zero just in case
cheers
Posted: Sun Jul 09, 2006 9:25 pm
by GOT MUD
badger wrote:they r in redcliffe
pm zero
hes your man
i cant find him on search to pm him can you help me out please
cheers