Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Auto gq

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 62
Joined: Sun May 15, 2005 12:53 am
Location: Melbourne

Auto gq

Post by liam hall »

How good are nissan gq auto boxs
Good for a real thrashing or will they break
Thinking about buying a shorty gq with 200,000 kays
cost to rebuild auto
Do it
Posts: 178
Joined: Mon Jun 02, 2003 3:21 pm
Location: Bayswater, VIC

Post by Aus4wd »

the autos are pretty tough just lazy on gear changes . they can cost up to 3500 to rebuild but if you get yours pulled apart and it doesnt have any damaged hard parts it should definatly be cheaper. they could do with a shift kit . we have one with a shift kit and 160rwkw no dramas
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

the best way to make them shift a bit better is to adjust your TPS around a bit more...... i nearly fried my trans after i put the V8 in.... it's set up properly now, and works great!! handles the V8 well... only thing is i have damaged it when i had the TPS set up wrong..... so it's life span is reduced, so the mechanic tells me anyhow.
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

Mine's auto and it has done quite few comps with no drama's. They do have a life span so and 200k is about when work needs to be done. If you do it before it melts then you'll save yourself a lot of money. I'm running 20psi, intercooled etc and apart from a shift kit, increasing the clutches, strengthening the torque convertor and using synthetic oil it is standard. They are strong but don't like heat. Keep them cool and you'll be fine. To give you an idea of how I treat mine. From a standing start during a comp, I'll stand on the brake and the trottle. It will get to 14psi before I take my foot of the brake ie no wheel movement, and as you can imagine it then launches fairly well.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Auto gq

Post by bogged »

liam hall wrote:How good are nissan gq auto boxs
awesome.. Putting one in my TD6 soon

Thinking about buying a shorty gq with 200,000 kays
cost to rebuild auto
$3000-4000 complete rebuild.
Posts: 62
Joined: Sun May 15, 2005 12:53 am
Location: Melbourne

engine braking

Post by liam hall »

What about engine braking on a petrol is it crap. Do you need low range reduction gears with 35 inch tyres
Do it
Temporary Australian
Posts: 6728
Joined: Fri Nov 28, 2003 7:45 am
Location: somewhere........ who knows where

Post by Vulcanised »

with mine and 35" tyres in low 1st there is a small degree of engine braking, but you need to be doing between 5 and 10kph before it happens. Which means you will still be riding the brakes down steep hills. As for reduction gears with an auto, i have standard gearing, and it's no dramas at all with 3.9 diffs. A bit of a pain on really steep hills where it gets the wheels spinning where you don't want them to..... Re-gearing to 4.65 will be more than sufficient i think.
There is no "I" in Team, but there are 5 in Individual Brilliance
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I'll put on flame proof suit before I say this. Engine braking is a load of crap. With an auto you have two pedal and obviously two feet. So you drive with a foot on each pedal and adjust the pressure according to what you are doing. It takes some praxtice as the left foot is trained to only press a pedal to the floor (ie clutch) so you need to teach it to feather the pedal. Once you have learned this then the only time you'll use engine braking is on road. I do almost all of my off road driving in high range particulary if it is wet. If it is dry then low range is useful but with the auto you get so much slip that you can use the slip as a form of traction control.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Re: engine braking

Post by zookjedi »

liam hall wrote:What about engine braking on a petrol is it crap. Do you need low range reduction gears with 35 inch tyres
although mine is a gu petrol auto , to answer your question yes the engine braking would be CRAP with 35's running 3.9's and low first down a half decent hill and would struggle up steep long inclines ,

i have the above but with reduction gears and it makes everthing so much easier , ive gone up hills on 33"s before the reduction gears and watched as the temp started to rise quite quickly ( given it was a long steep hill ) but with the gears the auto is magic running 35's up or down hills , and stops you from cooking your brakes on the down hills , i would much prefer to use the engine braking with reduction gears than to cook the brakes and warp my rotors , but than again it depends on how big hills are around you and how often youd drive em

cheesr Jai
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Brake pads are cheap. Brake discs are cheap. Shagging the auto aint cheap.
Also brake pads are easy to change.
Oh and I have had warped discs over the years (that was a manul TD42) but aint they floating calipers. So they still move with the disc.
THOUGHT FOR THE DAY....
Posts: 603
Joined: Mon Nov 08, 2004 6:19 pm
Location: Mt Isa

Post by raptorthumper »

If you have reduction gears, nothing gets shagged. Engine purrs up hills, with very little converter slippage. And brake free descents down very steep hills.

I've said it before and i'll say it again. Reduction gears are awesome for auto patrols.

Just my opinion, not knocking anyone.


____________________________________
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

nzdarin wrote:I'll put on flame proof suit before I say this. Engine braking is a load of crap. With an auto you have two pedal and obviously two feet. So you drive with a foot on each pedal and adjust the pressure according to what you are doing. It takes some praxtice as the left foot is trained to only press a pedal to the floor (ie clutch) so you need to teach it to feather the pedal. Once you have learned this then the only time you'll use engine braking is on road. I do almost all of my off road driving in high range particulary if it is wet. If it is dry then low range is useful but with the auto you get so much slip that you can use the slip as a form of traction control.
Very well put!!!!!
Posts: 160
Joined: Sat Jul 01, 2006 8:03 pm

Post by bigbennymq »

yeh heard the autos are top shit
Posts: 62
Joined: Sun May 15, 2005 12:53 am
Location: Melbourne

Post by liam hall »

Do the comp gq's run auto or still manuals and do they run reduction gears
Do it
Posts: 178
Joined: Mon Jun 02, 2003 3:21 pm
Location: Bayswater, VIC

Post by Aus4wd »

liam hall wrote:Do the comp gq's run auto or still manuals and do they run reduction gears
we run one of our cars as an auto with standard t-fer gears
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

liam hall wrote:Do the comp gq's run auto or still manuals and do they run reduction gears
Theres starting to be a number of people who are going to autos. One I heard of was cos with the turbo petrol, they couldnt keep clutches up to it. But at last years Ateco I was surprised with the number of autos. Atleast a third of the field maybe more.
THOUGHT FOR THE DAY....
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I have competed in the last 5 winch comps in NZ and there's quite a lot of auot's running over here. An auto is by far the best option when winching as you can match the tyre speed to ground speed without having to ride the clutch. Idealy what you want is a clutchless manual as the weak point is not the gearbox but the clutch. There would be more GQ auto's running here except that the PTO is on the gearbox so with an auto you must run either electric or hydrualic winch. Reduction gears aren't really that useful for winch comps as normally you are going fast anyway. I hardly use low range at all!
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests