Page 1 of 1
Solid Axle Hilux Axle Relocation Plates ?
Posted: Tue Jul 11, 2006 7:30 am
by LuxyBoy
Looking at getting these from Sky Manufacturing
http://www.sky-manufacturing.com/
Just wondering if anyone has used them?
Are they legal?
Are there any foreseen problems with them? (more axle wrap maybe)
Posted: Tue Jul 11, 2006 2:57 pm
by benhl
If you intend to use these on the front of a SA lux, you can achieve the same fwd movement by redrilling the spring perch on one side as there is already a hole in one of them about 30mm rearward to stock location (= diff fwd 30mm) the only advantage i could see on the front is castor correction if using ext shackles or similar but these spring wedges seem flat and offer no correction.
Your call...
angles
Posted: Tue Jul 11, 2006 5:24 pm
by LuxyBoy
I was thinking maybe use the existing second hole that is forward a bit and replicate it on the other side on the front perch; then mount these in them to increase track. Do the same on the rear to increase track quite substantially and give better approach/depart angles
Just don't know if it will affect anything else moving them this far
