Page 1 of 1
I NEED MORE LIFT
Posted: Thu Jul 13, 2006 7:20 pm
by ike181
Hi guys, I’ve got a 1980 MQ and it’s got a 2 inch body lift and 3 in spring lift. I won’t some more height and i don’t know wat to do, I’m getting a set of 35’s will they bring it up much?
Thank Alex
Posted: Thu Jul 13, 2006 7:22 pm
by MyGQ
Have you done a SOA yet?
Posted: Thu Jul 13, 2006 7:25 pm
by ike181
nuh, how much do they cost and how much will i get out of it ??
Posted: Thu Jul 13, 2006 7:27 pm
by badger
what do you mean by a spring lift? reset springs?
if so get extended shackles
also look into gaurd chopping it to keep the cog lower tall shorties r scary
Posted: Thu Jul 13, 2006 7:28 pm
by ike181
well the gards are going this weekend
..
Posted: Fri Jul 14, 2006 12:11 pm
by JemmyBubbles
Just chop don't lift....
Thats the way..
Posted: Fri Jul 14, 2006 6:16 pm
by ike181
wat das chopping do ?
Posted: Fri Jul 14, 2006 6:57 pm
by KIWI
Chopping the guards will allow bigger tyres to fit in without rubbing.
Fitting 35's will help with diff clearance, but how much higher depends on what size you run at the moment. If its 33's you get about 1" more clearance.
Posted: Fri Jul 14, 2006 8:10 pm
by ike181
hahah i'm running 31's
girly tyres
Posted: Sun Jul 16, 2006 10:03 am
by zer0
mate
as i said the other nite you should do the guard cut as i have only got 3 in body and run 35's and i will not scrub them at all any more
Heath
Posted: Sun Jul 16, 2006 3:52 pm
by Big Red Toy
guard cut