Page 1 of 1

Anyone had a cam regrind on their 1.3?

Posted: Fri Jul 14, 2006 12:48 am
by dank
just looking at options to give the zook a little more go in the 2-5grand rpm range.

Anyone done this before? Crow Cams in Vic offer this service...

I'm happy with the 1.3 but would like opinions on this. I

Searched and it seems like its a mod that can be done for under $100. might be worth it who knows :cool:

Posted: Fri Jul 14, 2006 1:01 am
by nicbeer
Yep, got a grind in mine. Over 3500 is biggest difference. but did notice it all round.

may be $100 but you have to install cam from back of motor remember. So either pull engine out or head off.

Nic

Posted: Fri Jul 14, 2006 10:59 am
by sbfoot
yaeh, I put a more agressive reground cam in my old sierra,was great on road,gave me a bit more top speed,loved to rev.However I did lose a bit of low down torque,but with series 1 rockhopper and only 31's it was not enough of a loss to really worry about.

Posted: Fri Jul 14, 2006 1:43 pm
by Guy
Lots of people have had cams reground ... if you search you will find out who ..

Seriously . click search, type in can and regrind (make sure you type in the and) and select the suzuki forum .. you will get lots of answers ..