Outer Limits 4x4 Board

Posted: **Tue Jul 18, 2006 3:15 pm**

Will the 240 Blitz fit on a Standard Steel Nissan Winch bar?
Thanks

Posted: **Tue Jul 18, 2006 6:04 pm**

no, but the xgt does, if you turn the bottom mount on the light around 180 deg and take the spacers off.

Posted: **Tue Jul 18, 2006 6:39 pm**

Can they be modded to fit or would it be better to just get the XGT's

Posted: **Tue Jul 18, 2006 10:48 pm**

I mounted my 240 Blitz on a RHS tube that has the nuts housed intelnally and blocked at the front so nothing can easily undo them. Have the bolts from the RHS pinned then with 4mm roll pins so anyone who thought they may pinch them, will have a shock having to undo the nuts

There is a ramp form at the front of the RHS, so you would have to get to the nuts through the grill.

The important thing for all of that is the ramped RHS - about 60mm wide keeps the lights above the bar

Posted: **Wed Jul 19, 2006 8:03 am**

I run 240 Blitz on the nissan steel bar, I just added about 4 thick washers on each side, works a treat.

Justin

Posted: **Wed Jul 19, 2006 9:03 am**

I fitted Blitz 240 to my brother in laws Patrol with Nissan winch bar.
I'll try to find photo and post it.

Posted: **Wed Jul 19, 2006 12:26 pm**

Thanks for the reply's
I just ordered a couple of Lightforce 240XGT's.Keen to get em now!

Outer Limits 4x4 Board

Lightforce 240's on Nissan Winch Bar?

Lightforce 240's on Nissan Winch Bar?