Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I have recently laid my hands on a complete UK Toyota Supra 3.0 for next to nothing.
Can anyone tell me if any of the Toyota 4x4 gearboxes fit behind it easily?
If possible I'd like to fit the engine into my UK Daihatsu Sportrak (Feroza) and fit portal axles.
The car:
The engine:
The Simca marmon(French unimog copy) Portal axles. I pick them up monday :
Any advice or links to truck with 7M conversions would be really helpful.
Thanks in advance.
Mac.
Ladoga 2007 pictures on my website: www.macsport4x4.com
hey, i have a 7MGTE in my hilux, if your 7MGE has a manual box behind it you can use it to bolt straight up to the G52 hilux box, If it's autto you will need to find a manual flywheel, clutch and bellhousing.
very easy conversion once you find the parts.
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
What engine sat in front of the G52 Hilux box. I just wondered if it was a gearbox that was fitted to UK hilux's or would I have to source one from outside the UK?
The Supra is a 5 speed manual, so no worries there.
Can you post some pictures of your install please?
I'll need to do some work to waterproof the engineand loom, but I think it will be worth the effort. I could retrofit a GTE motor at a later date should I find one worth re-building.
Mac.
Ladoga 2007 pictures on my website: www.macsport4x4.com
I intend to use the car for UK Winch Challenges. The cars life will be very hard indeed, so i'm after the strongest box I can afford.
The plan is to use Daihatsu Sprtrak(Feroza) chassis and body. Lengthen the wheelbase slightly. Fit the Simca Portal axles. External rollcage, minimum 37" mud tyres, and fit the Supra motor, basicly because they are cheap and easy to get hold of in the UK. I might try and get a GTE motor and rebuild it with a few mods.
I have been told that a few people have fitted the Lexus Soarer Turbo motor quite easily. Does anyone have any information on what gearbox would work with that engine?
As I havent started building the truck yet, I can still chop and change the spec, so any suggestions are welcome.
Mac.
Ladoga 2007 pictures on my website: www.macsport4x4.com
hokey wrote:Don't kid yourself mate a NA 7M isn't all that powerful so i think that the G series box will take it
Balls!! G52 wont take it for long.
Woah there.. my 7M-GE been hanging off a G52 for a couple of years and before that same box and 2 years behind a 5M-GE..
If you dump the clutch you wil kill it tho..
hokey wrote:Don't kid yourself mate a NA 7M isn't all that powerful so i think that the G series box will take it
Balls!! G52 wont take it for long.
Woah there.. my 7M-GE been hanging off a G52 for a couple of years and before that same box and 2 years behind a 5M-GE..
If you dump the clutch you wil kill it tho..
yeh more the left foot that kills the box as opposed to the power under the right one
:
