Page 1 of 1
hj75 winch cradle
Posted: Wed Jul 19, 2006 3:37 pm
by bigred
Has anyone ever seen a :off the shelf" winch cradle to suit a hj75 with a ally bar
Posted: Wed Jul 19, 2006 5:49 pm
by plowy
probably talk to arb or tjm
or even better find out what bar it is and try that manufactorer but the other 2 do do them
Cradle
Posted: Wed Jul 19, 2006 11:43 pm
by playtime 4x4
TJM or ARB did not make a cradle for the factory alloy bar. Toyota fits the winch without one(not a good option). Take your measurments of the winch and see how much room you DONT have. Have done a few now and they are tight. If its too much hassle for you look for a second hand steel or ECB alloy. ECB is heaps stronger, will still need a cradle, which they supply.
Dave