Page 1 of 1
Q for the newy crew
Posted: Wed Jul 19, 2006 9:48 pm
by joe crothers
to the newy crew. Just wondering if anyone could recommend a panel beater up that way that could do some panel trimming to my brothers
GU, he has just fitted 37" creepies on his wagon. It has a 5" spring lift
and just needs a bit of a trim in the wheel arches. He is moving up there
this weekend from VIC and knows no one in you area. The rear quarters
have already been chopped and no original bar.
Posted: Wed Jul 19, 2006 11:38 pm
by GUHOON
What suburb is he moving too?
Any decent panel beater in the area should be able to take care of it.
panel shops in newie
Posted: Thu Jul 20, 2006 12:34 pm
by joe crothers
thanks mate he is actually moving to Singleton. Just thought Id suss it out for him before he gets up there. He should find some one no worries
cheers joe
Re: panel shops in newie
Posted: Thu Jul 20, 2006 5:14 pm
by Mick.
joe crothers wrote:thanks mate he is actually moving to Singleton. Just thought Id suss it out for him before he gets up there. He should find some one no worries
cheers joe
Singleton is a fair way out of Newcastle mate. I'm sure there would be plenty of panel shops up there that would do the job.
Cheers Mick.
Posted: Thu Jul 20, 2006 10:42 pm
by cooter
adamthwait (sp) smash repears in the book do a good job
Posted: Thu Jul 20, 2006 10:47 pm
by otis05
I recommend Spectrum Smash Repairs at Gateshead. contact is brendan Dipper - good job, insurance or cash.
Posted: Thu Jul 20, 2006 11:15 pm
by GUHOON
I recommend whatever panel shop Mick. works for
(do i get a spotters fee Mick)
gu panel trimming
Posted: Fri Jul 21, 2006 11:18 pm
by joe crothers
thanks to those who RECCOMENED a panel beater with a name and direction for us. A tradesman who has done this job or similar is better
than one who doesnt understand the articulation of a GU with these size
tyres and the exact radius that needs to be trimmed.
joe
Posted: Sat Jul 22, 2006 12:34 pm
by Mick.
GUHOON wrote:I recommend whatever panel shop Mick. works for
(do i get a spotters fee Mick)
I'd be lucky to get a spotters fee myself off the tight asses I work for.
We don't do that sort off work except our own 4wds
. We only do insuranace work and new car warrenty work for dealerships.
I cant think of anyone off the top of my head that specialised in that type of work but i'm guessing anyone that does restoration work would quite happily do it.
Cheers Mick.