Outer Limits 4x4 Board

I have a TJM T15 steel bullbar and I'm fiting a 9000 pound warn low mount winch .
what I need to know is dose this bar use a seperate winch plate like on the 100 series?
hase any one got a t15 bar on a 80 with a winch fitted?

Im pretty sure they dont need a which mount frame being a steel bar


Just ring up a tjm shop and ask them if they make one for it \



if you dont get a answer here

Jimbo
It doesnt need the cradle, only airbag cars need that, as the bar has crush zones.
Andrew

dow50r wrote:Jimbo
It doesnt need the cradle, only airbag cars need that, as the bar has crush zones.
Andrew

thanks thats what I wanted to hear

I've got a tjm bar, and I'd be putting a cradle in if i was running a winch!

Damn things only held on with 6 bolts and side only!

Quite frankly I've found the bar to have excellent flex over the years...

Odd??? I'll say so! Going team booty fab now anyways!

80diesel4play wrote:I've got a tjm bar, and I'd be putting a cradle in if i was running a winch!

Damn things only held on with 6 bolts and side only!

Quite frankly I've found the bar to have excellent flex over the years...

Odd??? I'll say so! Going team booty fab now anyways!

is yours alloy or steel? do tjm make a cradle ?

I recently fitted a steel t15 bullbar and warn xd9000 to my 80 series (air bag) cruiser.
Didn't need a cradle for the winch, but I did make a bracket at the front for the rollers as I recon the cable can flex the standard bracket on it's two bolts too easily. You will be able to see what I mean when you fit it!
You may have fun adjusting the bar on its bolts to fit it properly. My bracket to protect the air con unit drier didn't fit so had to be modified. TJM wasn't really interested when I brought up the problem with the bracket to their attention. (My car has never had any front end damage!!)

I Have a ARB high mount winch bar that i would be willing to trade for a non winch steel bar if you are interested?