Outer Limits 4x4 Board

Guys,

By the looks of the archives a few people seems to have custom made some of these..

Anyone got any info on what is required and/or involved..

Thanks in advance

Dave

Just buy the biggest one you can fit between the headlights, you will have to remove your front grille to fit it in. There should be enough room to run some 2-1/2" pipes, probably have to cut 2 holes in the front skirt thingo.

No Chance anyone might have photos of plumbing etc... ?

Cheers

Dave

wgw76gd wrote:No Chance anyone might have photos of plumbing etc... ?

Cheers

Dave

http://www.outerlimits4x4.com/PHP_Modul ... ntercooler

heres some ona HJ60, shouldnt be too much different on a 61, perhaps might be more room since the square headlights arent as tall as the round ones.

Shadow has already linked you to my old setup in my cruiser.

It was recently retrofitted into a 1988 model HJ60, with the twin headlights. It was infact more of a squeeze, and required a few alterations to the front apron to get the 3 inch pipes through.

Having said that, the intercooler looks better in the later model cause it basically fully replaces the front grill.

Thanks very much fellas,

Now just have to look for one !!!

Cheers

Dave

wgw76gd wrote:Thanks very much fellas,

Now just have to look for one !!!

Cheers

Dave

have a look on ebay

always cheapish ones on there