Outer Limits 4x4 Board

A mate of mine has an 01 petrol manual 100. Just installed a 4" lift and 315/75/16 (35's) and wants to change the diff ratios back to standard.

Any one know if there are any different ratios available for the 100??

Alec

A mate of mine was after some 4.88;'s for his 100 a couple of weeks ago.. and J mac in sydney told him that u can do the front but nothing is avalible for the rear yet..

BUT

U can do it but u need to put an 80 series air locker (or lsd) in the rear.. then u need to use 80 series axels. get them redrilled to suit the 10mm studs .. its jsut too much stuffing around to do it that way

sounds like a easy enough change to drill out some holes for 10mm studs

crankycruiser wrote:A mate of mine was after some 4.88;'s for his 100 a couple of weeks ago.. and J mac in sydney told him that u can do the front but nothing is avalible for the rear yet..

BUT

U can do it but u need to put an 80 series air locker (or lsd) in the rear.. then u need to use 80 series axels. get them redrilled to suit the 10mm studs .. its jsut too much stuffing around to do it that wat

thats pretty much right, 4.56's and 4.88's available.

Thanks, thats what I thought but was just checking.

Alec