Page 1 of 1
falcon seats into a sierra
Posted: Wed Jul 26, 2006 2:35 pm
by chunkz
well someone gave me some ef fairmont seats... for free
any who
i was wondering if any one has ever put these into a sierra before?
or any similar type of conversion...
i had a look at this, the falcon tracks are longer and wider, but yeh...
just wondering is it possible to do this an easy way
or basically just weld the tracks in?
cheers
(passenger and driver)
Re: falcon seats into a sierra
Posted: Wed Jul 26, 2006 4:41 pm
by Damo
chunkz wrote:well someone gave me some ef fairmont seats... for free
any who
i was wondering if any one has ever put these into a sierra before?
or any similar type of conversion...
i had a look at this, the falcon tracks are longer and wider, but yeh...
just wondering is it possible to do this an easy way
or basically just weld the tracks in?
cheers
(passenger and driver)
The bottom of zook seats are flat. So take the rails off the falcon seats and have a look at the bottom of them, are they flat too? If so it will be easy to make a couple of adapter rails, bolt them to the seat, then the rails to the stock zook rails and you're away. That's what I have done with a set of Jap import seats before. Check your seat height though, as a lot of seats put you pretty high up (not good if you are tall). One good thing though is you can move the seat (forward/back/left/right) so you have it exactly where you want it.
Damo.
Posted: Wed Jul 26, 2006 9:21 pm
by chunkz
yeh im going to have to bend some bits to make them straight...
they are slightly angled