Outer Limits 4x4 Board

I have had a mate who works in hydraulics pull the power steer box out of an MQ apart and he said, becuase its a rack and Pinion style Box, that it cant be tapped out for hyrdo assist.

if this is the case.... can it be done with GQ power steering boxes? or what other steering boxes can you do this 2 that are not rack and pinion?

cheers

Screwy

no one? im interested in this also

Im pretty sure you can do it to hilux boxes Have a chat to benny he know more bout it


Im just a commodore driver now

You can do it with most boxes including GQ/Mav.
I did my Mav around 5 yours ago.

Cheezy4x4 wrote:You can do it with most boxes including GQ/Mav.
I did my Mav around 5 yours ago.

mq steer box?

Screwy Try yuri at www.yuri4x4.com as he is the guru on all stuff hydro.
But as i know 60s boxes and rangie ones are easy to do. The rangie one would be the easiest and it bolts on the inside of the rail.


Cheers Jamie

with hydro assist can it ever be possible for the ram to be fighting with the steering box, or does the ram just take over all the "load" of the steering box?

Has anyone done this to a Vitara box before?

EDIT: Just been doing some sniffing around on the web, seems like it has been done before. Couldn't find any write up, but did find a couple of pics.

http://xfaktor.net:8082/frmleft.php?sec ... ion=suzuki

I will probly getting damo aka yuri to do my vit box in the near future. Il tell you how it goes then

Rhett wrote:I will probly getting damo aka yuri to do my vit box in the near future. Il tell you how it goes then

What ram are you going to run with it?

hes has rams there don't know the brand but he limits them to whatever length you want and have a hiem joint in each end already.