Outer Limits 4x4 Board

how much for long feild cv`s for a 92 lux what ones are the best to run any info apreciated

Depends on what style you want.....

If you want the best (30 Spline Chromo) $1000-$1500
Old style (welded ring type) not available new anymore http://www.outerlimits4x4.com/PHP_Modul ... hp?t=81987

You can get the 30 spliners in at the moment for about $1100 with the way the aussie $ is at the moment,.

bulldogy wrote:You can get the 30 spliners in at the moment for about $1100 with the way the aussie $ is at the moment,.

As is always the case when importing gear from OS - budget for more than expected!

Here you go.

http://www.longfieldsuperaxles.com/

Only about $840 Aus for the 30 spline at the moment and $744 for the 27 spline EACH SIDE

Thats without shipping.

I have to get a set in soon so pm me if your interested in getting a set the same time. Have to talk to a mate his dad gets containers in around every 4-6 weeks so if he could throw a few sets in amongst his stuff that should be cheaper to throw him a few bucks rather than pay shipping to get them here

Dingo wrote:Here you go.

http://www.longfieldsuperaxles.com/

Only about $840 Aus for the 30 spline at the moment and $744 for the 27 spline EACH SIDE

Thats without shipping.

I`d be looking at that again

"4 piece super set including 2 snap rings"

the exchange rate was close enough but he said for each side, fark that

By my reading it is both sides - 4 piece set - that's not too bad....

Dingo wrote:Here you go.

http://www.longfieldsuperaxles.com/

Only about $840 Aus for the 30 spline at the moment and $744 for the 27 spline EACH SIDE

Thats without shipping.

I know the price is for a SET, Dingo said EACH SIDE

Depending on my dollars in about 2 months I might get a set as the ones I have now have done lots of work and are starting to click.

so its around 840 for the 30 spline for the front end

kinglakekustoms wrote:so its around 840 for the 30 spline for the front end

then add shipping costs and customs etc and you will be up near $1100

Im reading it as a side 4piece not both sides or it would be 8 piece

sniper wrote:Im reading it as a side 4piece not both sides or it would be 8 piece

both sides = 4 pieces, 1 axle and 1 cv per side. the super set contains this and will do your entire front end.

if you think there is more than one cv and axle in each side at the front , long fields are the least of your worries

fark me how hard is it, there is a pic of what you get, 4 pieces is 2 axles and 2 cv`s

my bad i never had a chance to look a t the link