Page 1 of 1
transfer case tech?
Posted: Sat Jul 29, 2006 10:17 pm
by steel
does anyone have any info on how to modify a transfer case to allow frontwheel drive, as well as rear & 4 wheel drive, to be selected independently
Posted: Sun Jul 30, 2006 4:09 pm
by Brendan-s
some buggies (ours included) run a rear engine setup with the gearbox and transfer facing the 'wrong' way. this allows 2WD in FWD only but thats if you don't want a RWD option.
Posted: Sun Jul 30, 2006 4:25 pm
by "CANADA"
4130warrior wrote:some buggies (ours included) run a rear engine setup with the gearbox and transfer facing the 'wrong' way. this allows 2WD in FWD only but thats if you don't want a RWD option.
For that the diffs are also flipped remember
Posted: Sun Jul 30, 2006 6:38 pm
by Brendan-s
woops valid point. i'm sure there's a tech head out there that can figure this out!
Posted: Sun Jul 30, 2006 11:24 pm
by "CANADA"
Posted: Sun Jul 30, 2006 11:24 pm
by "CANADA"
www.yuri4x4.com
Rear disconnect
Posted: Mon Jul 31, 2006 7:26 pm
by steel
thank you, those disconnets look the alright. i wondour how smoothly they operate? driveline must be stationary to engage / disengage? i want to be able to run rear wheel drive on a rear engined buggy. i have'nt chosen a transfer case yet