How did they route the steering shaft?
And did you use the Stage1 steering column??
The rest should be easy enough
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Power steering ---> Stage1
Moderator: Micka
Power steering ---> Stage1
Has anybody done it?
How did they route the steering shaft?
And did you use the Stage1 steering column??
The rest should be easy enough
How did they route the steering shaft?
And did you use the Stage1 steering column??
The rest should be easy enough
[quote="dazza30875"]whats "FAIL" mean[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
This may or may not help, but there was a write up in LRO some time ago about power assist for series, and I think they said the stage 1's were even easier to do... Sorry I can't remember the issue.
JC
JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Anyone 
Even some pics of Rangie box's would help...
Going for a RWC in a month or so and steering is a major part of something i want fixed...Getting rid of the strong arm would be a bonus too
Even some pics of Rangie box's would help...
Going for a RWC in a month or so and steering is a major part of something i want fixed...Getting rid of the strong arm would be a bonus too
[quote="dazza30875"]whats "FAIL" mean[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
[quote="fool_injected"]
Sometimes your funny Canada :D[/quote]
I'm not sure, but I can describe what I have the stuf to do, but have not done yet.
I've got a 2a, the steering linkages are to be replaced with a Defender column which LVS tell me bolts straight in. I'm then linking forward to an LC60 steering box with a hybrid linkage. The LC60 steering box is outboarded though unlike the Rover setups. Then a factory LC60 link down to LC60 axles. I have a RR PAS compressor that will run of the Stage 1 V8 hopefully and I'll have the hydro lines made to suit Rover pump to Toyota box.
I've got a 2a, the steering linkages are to be replaced with a Defender column which LVS tell me bolts straight in. I'm then linking forward to an LC60 steering box with a hybrid linkage. The LC60 steering box is outboarded though unlike the Rover setups. Then a factory LC60 link down to LC60 axles. I have a RR PAS compressor that will run of the Stage 1 V8 hopefully and I'll have the hydro lines made to suit Rover pump to Toyota box.
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
http://www.stage1v8.org.uk/phpBB2/index.php?
check that out
i've not searched for a post on it or anything, but it will be a good source of info.
i think it will be pretty much a case of adding defender components, column, box, pump.
main issue with putting standard rover stuff in a series is a big crossmember in the way i think. Stage 1 layout is the same as defender.
Alas i have no idea how the drop arm attaches.
pump mounting/plumbing should be easy enough though.
hell there's even a topic about that on the first page
http://www.stage1v8.org.uk/phpBB2/viewtopic.php?t=197
i imagine searching may also yield some more results there although i don think there are too many posts
check that out
i've not searched for a post on it or anything, but it will be a good source of info.
i think it will be pretty much a case of adding defender components, column, box, pump.
main issue with putting standard rover stuff in a series is a big crossmember in the way i think. Stage 1 layout is the same as defender.
Alas i have no idea how the drop arm attaches.
pump mounting/plumbing should be easy enough though.
hell there's even a topic about that on the first page
http://www.stage1v8.org.uk/phpBB2/viewtopic.php?t=197
i imagine searching may also yield some more results there although i don think there are too many posts
Who is online
Users browsing this forum: No registered users and 3 guests