Page 1 of 1

any adaptors to suit AU auto's

Posted: Mon Jul 31, 2006 9:33 pm
by bad_religion_au
got an offer for an AU xr6 motor and auto, and was wondering if thre are any adaptors to wack a t case behind it

Posted: Mon Jul 31, 2006 9:36 pm
by 6.5 rangie
Apparently not a great auto, so i'm told

Posted: Mon Jul 31, 2006 10:21 pm
by Gwagensteve
Not that I am aware of. Might be better to run a manual computer and use a C4- that can be adapted to stuff. will be shorter too.

Steve.

Posted: Mon Jul 31, 2006 10:21 pm
by Eddy
could go a divorced type - Nissan MK/720

Could also find out what they use in the terror tree

Posted: Mon Jul 31, 2006 11:01 pm
by bad_religion_au
Gwagensteve wrote:Not that I am aware of. Might be better to run a manual computer and use a C4- that can be adapted to stuff. will be shorter too.

Steve.
hmm looks like the stuff around will make it not worthwhile.

might just throw it in the crown that blew it's motor then :D

although i'm told they have smartlock or someting... which means it won't start unless i get the ignition barrel/key from the car as well apparently

Posted: Mon Jul 31, 2006 11:05 pm
by "CANADA"
bad_religion_au wrote:
Gwagensteve wrote:Not that I am aware of. Might be better to run a manual computer and use a C4- that can be adapted to stuff. will be shorter too.

Steve.
hmm looks like the stuff around will make it not worthwhile.

might just throw it in the crown that blew it's motor then :D

although i'm told they have smartlock or someting... which means it won't start unless i get the ignition barrel/key from the car as well apparently

New computer?

Posted: Mon Jul 31, 2006 11:52 pm
by bad_religion_au
MADZUKI wrote:
bad_religion_au wrote:
Gwagensteve wrote:Not that I am aware of. Might be better to run a manual computer and use a C4- that can be adapted to stuff. will be shorter too.

Steve.
hmm looks like the stuff around will make it not worthwhile.

might just throw it in the crown that blew it's motor then :D

although i'm told they have smartlock or someting... which means it won't start unless i get the ignition barrel/key from the car as well apparently

New computer?
can get em to run with an aftermarket comp, but i've been told that won't run the 4 speed box.

Posted: Tue Aug 01, 2006 12:05 am
by "CANADA"
bad_religion_au wrote:
MADZUKI wrote:
bad_religion_au wrote:
Gwagensteve wrote:Not that I am aware of. Might be better to run a manual computer and use a C4- that can be adapted to stuff. will be shorter too.

Steve.
hmm looks like the stuff around will make it not worthwhile.

might just throw it in the crown that blew it's motor then :D

although i'm told they have smartlock or someting... which means it won't start unless i get the ignition barrel/key from the car as well apparently

New computer?
can get em to run with an aftermarket comp, but i've been told that won't run the 4 speed box.

Im sure there is a piggyback availible or some way to bypass it

Posted: Tue Aug 01, 2006 12:54 am
by bad_religion_au
MADZUKI wrote:
bad_religion_au wrote:
MADZUKI wrote:
bad_religion_au wrote:
Gwagensteve wrote:Not that I am aware of. Might be better to run a manual computer and use a C4- that can be adapted to stuff. will be shorter too.

Steve.
hmm looks like the stuff around will make it not worthwhile.

might just throw it in the crown that blew it's motor then :D

although i'm told they have smartlock or someting... which means it won't start unless i get the ignition barrel/key from the car as well apparently

New computer?
can get em to run with an aftermarket comp, but i've been told that won't run the 4 speed box.

Im sure there is a piggyback availible or some way to bypass it
hmm i'm sure there's a way, problem is, it takes the polish off the low price of the setup, so if it won't work easily, i might as well just go with something easier (say a 302 in the crown :D)

Posted: Tue Aug 01, 2006 9:49 am
by cloughy
There is a mob in queensland who does a module to override smartlock, its just a little signal generator, or send them your puter and they'll install it inside, less than 300 bucks, i've used them on a few fords

Posted: Tue Aug 01, 2006 7:23 pm
by built4thrashing
There is a mob in queensland who does a module to override smartlock, its just a little signal generator, or send them your puter and they'll install it inside, less than 300 bucks, i've used them on a few fords
stolen a few fords have we??? :roll:

Posted: Tue Aug 01, 2006 7:27 pm
by "CANADA"
built4thrashing wrote:
There is a mob in queensland who does a module to override smartlock, its just a little signal generator, or send them your puter and they'll install it inside, less than 300 bucks, i've used them on a few fords
stolen a few fords have we??? :roll:

Thrown a few pies have we?



I still think it would bennifit to have a new low K engine in the crown :twisted:

Posted: Tue Aug 01, 2006 8:00 pm
by bad_religion_au
MADZUKI wrote:
built4thrashing wrote:
There is a mob in queensland who does a module to override smartlock, its just a little signal generator, or send them your puter and they'll install it inside, less than 300 bucks, i've used them on a few fords
stolen a few fords have we??? :roll:

Thrown a few pies have we?



I still think it would bennifit to have a new low K engine in the crown :twisted:
but a cheap 302 or 308 on gas would tow better. buy a commo or falc, throw the whole lot in... dunno

Posted: Tue Aug 01, 2006 9:39 pm
by cloughy
built4thrashing wrote:
There is a mob in queensland who does a module to override smartlock, its just a little signal generator, or send them your puter and they'll install it inside, less than 300 bucks, i've used them on a few fords
stolen a few fords have we??? :roll:
if i was gonna steal them, i'd just wedge a screw driver under the door handle to open the doors and slide hammer the ignition barrel out then start it with a flat head screw driver, NOT spend 270 buck on a signal generator now would I???? :finger: