Outer Limits 4x4 Board

hi the bushpig here any good ideas of rust proofing under the front guards ron (ronoor) was chopping the zook for a virtual lift and seen some rust.
So whats the best for under the wheels section

Here is some pics on the mods to the whole vehicle including the rust at the front




Note the virtual lift then note the reverse light the winch




christover1 I think you have created a zook freak out of ron ever since he's come back from the bush he's gone lets add more!!

You can buy rust-convertor stuff from most auto places, but it's not much good until you actually have rust.

Great thing about the Feroza is the galvanised body

I've used that spray-on bitumen stuff for inner guards before...seems to work Ok, but others may have other solutions.

tar paint, ormonoid, body deadener, all work well.

And hide dodgy work too

Looking good Ron.
Now ill have to chop mine

christover1 wrote:tar paint, ormonoid, body deadener, all work well.

And hide dodgy work too

That Tar brush on stuff seems the go does any body know were do you get it?

bushpig59 wrote:

christover1 wrote:tar paint, ormonoid, body deadener, all work well.

And hide dodgy work too

That Tar brush on stuff seems the go does any body know were do you get it?

I've found it in auto shops, paint shops, panel beaters, kmart, bunnings and more. Killrust is a good one, but they are all pretty good.
In bunnings I found it in plumbing section, as well as paint section.

christover