Page 1 of 1
GU Body tail lights
Posted: Wed Aug 02, 2006 2:06 pm
by DBW
How do you remove them? Do they pop out or? Just prefer to know before I crack one attempting to pop it out seeing I can't see any screws etc?
For the search nazi's I have done one and found nothing...
Thanks in advance.
Posted: Wed Aug 02, 2006 2:10 pm
by Potter
just inside there are 2 10mm bolts behind the jack and 2 the other side behind that little panel.
after you undo them they rotate towards the front of the car.
they take a little bit of force to get them to come out.
Josh
Posted: Wed Aug 02, 2006 4:03 pm
by DBW
No wonder, neither lights had bolts in them. All four have rattled out!
Thanks, I've got them out now.
Posted: Thu Aug 03, 2006 3:44 am
by j-top paj
why do you want them out? are you replacing them with ones that actually work? id like to do that to mine
Posted: Sun Aug 13, 2006 2:28 pm
by manno74
are you replacing them with ones that actually work? id like to do that to mine
Don't have the details on hand, but there is a kit you can get to fit a set that actually works! It just plugs into the existing wiring harness. Check some of the adds in 4x4 monthly (not sure which one, but I did find it through there...)
Posted: Mon Aug 14, 2006 5:38 am
by djd2
You could just wire them up yorself,It's not that hard.