Outer Limits 4x4 Board

just wondering where to mount an arb compresser in my 75 series diesel tray. its only for tyres at the moment but lockers are on the cards

i have my arb compressor in between the air filter box and the brake master cyclinder, seemed a good spot at the time and fitted. bolted the mounting braket to the inner guard

Have you thought of putting an air tank in so that you commpressor does'nt work as hard?
I wouldnt put my commpressor anywhere that it would suck dust or mud that stuffs abrasive.
If you have thought of using a air tank get a fire extinguiser the water and DCP type are rated to about 140psi its written on it and the CO2 type about 300psi the added bonus is that all the connection you need are already built on them and you can fill them up at you servo before you go wheeling. That way if your commpressor F's up your lockers still work

just had a look thanks tobie i recon it will fit there on my ute too. mudmacaca i will do an air tank at some stage under my tray heaps of room there. u had a few good ideas mate thanks

tobie wrote:i have my arb compressor in between the air filter box and the brake master cyclinder, seemed a good spot at the time and fitted. bolted the mounting braket to the inner guard

That is exactly what I did.

bolted in the compresser today should have wired id up but got caught near the fridge and that was that. was a bit of fiddling but not to bad. think i will work on the tank next as i think it could be a good idea and save a bit of time..